Installation and Commissioning Guide
ICUNO-MOD
3
2
Installation and Commissioning Guide ICUNO-MOD
Doc. No. 9590-3013
Ver. 5 200722
ActronAir is constantly seeking ways to improve the design of its products, therefore specifications are subject to change without notice.
Copyright © 2019 Actron Engineering Pty. Ltd.
01. Introduction
CONGRATULATIONS
on your purchase of an ActronAir
BMS kit. This kit has been designed and engineered to
give you total control flexibility for the integration of
your ActronAir ducted air conditioner into a central or
remote Building Management System. Such integration
provides better control and monitoring of your air
conditioning system for optimum comfort, efficient
operation and energy savings.
The procedures outlined in this guide are provided to
correctly and safely install the ActronAir BMS kit to an
appropriate ActronAir ducted air conditioning system.
Failure to follow these procedures may result in personal
injury, damage to the air conditioner, damage to the
BMS card or incorrect operation of the air conditioning
system. Such failure could render your warranty null and
void.
01.01. Items to Consider
• Carefully unpack the ActronAir BMS kit from its
packaging.
• Fully check the contents of your kit against
the content list upon receiving your shipment.
Inspect the components and accessories for any
sign of shipping damage. If there is any damage
to the contents, contact ActronAir Customer
Care Department immediately on:
1300 522 722
.
• Make certain that the ActronAir BMS kit is
compatible with the ActronAir air conditioning
system you plan to install it on.
• Take time to thoroughly read the installation and
commissioning instructions before proceeding
with the installation.
01.02. Safety Instructions
Safety instructions and warnings provided in this
Safety instructions and warnings provided in this
installation manual are non-exhaustive and given
installation manual are non-exhaustive and given
as a guide only. Prevailing
as a guide only. Prevailing WH&S regulations must
be observed and will take precedence to the safety
instructions contained in this manual. Safe work
practices and environment must be of paramount
importance in the performance of all service
procedures.
• Read all instructions in this manual before
operating the air conditioning unit. Failure to
do so may result in damage to the unit and void
your warranty.
• Turn-Off power from mains supply by removing
fuse or switching the circuit breaker to the OFF
position before performing the installation
procedures.
• Follow sound Lock Out and Tag Out procedures
to ensure that power supply is not
re-energised accidentally.
• Ensure that all safety work procedures and
instructions are adhered to at all times in order
to prevent personal injury or damage to the
equipment.
• Only licensed technicians are allowed to perform
the procedures described in this guide.
• The ActronAir BMS is for OUTDOOR and
Packaged unit use only.
Install your BMS away
from excessive dust, heat and moisture.
• The air conditioning electrical panel and the
ActronAir BMS kit contain static sensitive
electronic components. Careful handling and
correct anti-static procedures must be followed
to prevent damage of the equipment. Failure to
protect the electronic components from static
electricity may cause unrepairable damage,
that is NOT COVERED for replacement under
Warranty.
• The instructions herein refer to work involving
sensitive electronic circuitry and components.
Please ensure all Instructions are followed
accurately so as to prevent damage to these
fragile and delicate components.
• WH&S rules and regulations must be observed
and will take precedence during installation
process.
01.03. Codes, Regulations and Standards
The installer and/or contractor assumes responsibility
to ensure that ActronAir BMS installation and
commissioning comply with the relevant council, state /
federal codes, regulations and building code standards.
All electrical wiring must be in accordance with
current electrical authority regulations and must
follow electrical diagrams provided with the unit.
01.04. Waste Electrical and Electronic
Equipment Disposal Guidelines
• Do not dispose of the waste electrical
and electronic equipment with local
council waste. These must be disposed
through the council designated
hazardous waste collection centre.
• The equipment may contain hazardous
substances. Improper or incorrect disposal may
have a negative effect on human health and on
the environment.
