ActionTec GT701-WG User Manual Download Page 94

Page: 94 / 163

Action

tec DSL Modem with Wireless Gateway User Manual

Chapter 7

Using Utilities

Restore Default Settings

To restore the Modem to its factory default settings, select

Restore Default Settings

from the “Utilities” screen. When the “Restore Default Settings” screen appears, click

Restore Default Settings

. Any changes made to the Modem’s settings will be lost

and the factory default settings restored. During this process, the Modem’s Power

light

flashes and the Modem is disabled.

Warning

: Do not unplug the Power cord from the Modem dur-

ing the Restore Default Settings process. Doing so may result in
permanent damage to the Modem.

When the Power Light stops flashing and glows steadily green, the Modem is fully
operational.

Upgrade Firmware

Selecting

Upgrade Firmware

in the “Utilities” screen generates the “Select

Upgrade File” screen.

Action

tec periodically posts firmware upgrades to enhance

the Modem’s capabilities. Follow the instructions on-screen to upgrade the
Modem’s firmware.

Summary of Contents for GT701-WG




































































































































































Search results

Summary of Contents for GT701-WG

Reviews:

Related manuals for GT701-WG

Brands by name

Popular brands

ActionTec GT701-WG, User Manual

Search results

Summary of Contents for GT701-WG

Reviews:

Related manuals for GT701-WG

Brands by name

Popular brands