ActionTec GT701-WG, User Manual

Page: 67 / 163

64
Action tec 54 Mbps Wireless DSL Gateway User Manual
65
Chapter 6 Advanced Setup
4.
In the next screen, read the recommendations. To perform an advanced setup
on the Gateway, click Begin Advanced Setup .
5.
The “Configuring the Advanced Settings” screen appears. To check all the set-
tings, or if unsure of which settings to modify, select Next . To modify a spe-
cific configuration, click on its name in the menu bar on the left.
☞
Note : To save changes made in any of the Advanced Setup
screens, click Save and Restart at the bottom of the gray menu
on the left side of the screen.
WAN IP Address
Selecting
WAN IP
Address in the “Advanced Configuration” screen generates the
“
WAN IP
Address” screen.
WAN IP
Address allows manual set up of the IP address
of the Gateway. There are five ways to do this:
Transparent Bridging, Obtain an
IP
Address through
PPP
o
E
,
Obtain an
IP
Address Through
PPPoA
,
Obtain an IP
Address through
DHCP
, and Specify a Static
IP
Address .