ActionTec GT701-WG, User Manual

Page: 12 / 163

9
Setting Up
the Modem
The instructions that follow parallel the steps contained in the Installation Guide, which
provides a visual guide to setting up the Modem. It is recommended the user run the
Installation Guide first, before attempting any other procedures.
To set up the Modem, it must be connected to a computer, and then configured.
After connecting this first computer, other computers can be added to the network
via Ethernet or USB (see “Setting Up a Network” on page
xx
).
Attention!
Read the following two sections (Alarm System, Automatic Water Heater)
before proceeding with any installation!
Alarm System
If your home or business has an alarm system, and if Qwest
DSL
shares the same
phone line, you have special wiring needs. If you did not order a technician install
at the time of sale, please contact your Security Alarm Provider or Qwest Sales as
soon as possible to order and schedule your installation.
If your security alarm system is wired incorrectly, it may not be able to make a
notification call when the alarm is triggered.
Professional wiring is required to ensure inter-operability.
Do not attempt the
installation yourself!
Qwest strongly recommends contacting your security organization for more
information about your security alarm system before attempting to install Qwest
DSL
. Qwest also strongly recommends contacting your security organization after
installing Qwest
DSL
to have them conduct a test of your alarm system.
Automatic Water Meter
Although most water companies do not utilize automatic water meters, some do. If
you have an automatic water meter using the same phone line as your Qwest
DSL
service, you must install a
DSL
Phone Filter.
Contact your water company for help installing the
DSL
Phone Filter on your water
meter, or if you are unsure whether your water meter uses your phone line.
2