22
4 Installing the Driver Software
23
DataLink V.90 PCMCIA Fax Modem
9.
When prompted to select the the manufacturer and model of the Modem,
click
OK
, then
Next
in the following window. The driver software
is installed.
Note
: To verify Windows has found the Modem, select
Start
,
Settings
,
Control Panel
, then
Modems
.
If dialing into a Windows NT Remote Access Server, or connecting to the
Internet, Dial-Up Networking must be configured properly. See the Windows NT.
documentation for details.
Next, go to chapter 5, “Installing the Communications Software.”
Windows 2000
To load the Modem’s software drivers onto a computer running Windows 2000:
1.
Insert the Modem into the computer’s PCMCIA slot.
2.
Turn on the computer.
3.
A “Found New Hardware” window appears, stating that Windows has
found a “Standard PCMCIA Card Modem.”
4.
Right-click
My Computer,
then select
Properties
from the pop-up menu.
5.
In the “System Properties” window, select
Hardware
, then
Device Manager
.
6.
When the “Device Manager” window appears, expand the “Modems”
section by clicking on the plus sign (“+”).
