18
EN
Functions of the Memory Master (Optional)
UP
DOWN
SAVE
Save
Memory Buttons
UP/DOWN
Press and hold these buttons to adjust height into a desired position. If you release the button
the height adjustment will stop.
Saving a preferred height position
Adjust the frame to a desired position. Press SAVE.
The display will show:
Immediately press one of the memory buttons, The display “-” will be replaced by the number of
the button you have chosen. Two seconds later the power supply will confirm the setting with a
double click sound.
Memory Buttons
Press and hold these buttons to adjust height into a preferred position. When you release the
button the height adjustment will stop. When the frame reaches the preferred position the
height adjustment will slow down and stop.
Changing displayed height
This function only changes the displayed height but not the actual height. Press SAVE once.
Ass soon as the display shows:
Press and hold DOWN until the displayed height blinkingly reappears. You can now change the
value by pressing UP or DOWN. To conclude this process simply press save.
Reset Mode
The first time you put in the plug of the power supply into the socket the height adjustment can
only be operated in the reset-mode. As long as the reset-mode is enabled, the system can only
move downward. In order to use the system normally, please follow the next steps:
Press and hold the down-button, the system slowly moves downward.
Please move the system to the lowest position. This position will be used as reference-point
(zero-point).
Keep the button pressed for a moment when the system has reached the lowest
position. This will end the reset-mode.
The system can be operated normally now. Press and hold the up- or down-button to move
the system to the desired height. The system stops when you release the buttons.
System restart—initializing the reset-mode
In order to initialize reset it is generally necessary to lower the frame to its lowest position.
Press “down-” buttons (about 10 seconds) until the sound “click” is heard.
Proceed with the “Reset-mode” instructions listed above.
