DOC 02110-1
ACTIA PCs
Page 39 / 52
ELECTRICAL SPECIFICATIONS
Battery power Input (Pin 1 and 2 of J20 – GND return through pin 3, 5 and 26 of J20):
Voltage: 8 V
to 36 V
Current: maximum 2.5 A (protection by 5 A external fuse is mixing panel not used)
Protections: polarity inversions and interference (Standards ISO 7637)
Filtering: EMC
Ignition input (Pin 4 of J20):
Voltage: -24 V to 100 V
Input resistance: 10 k (current less than 10 mA)
Active: greater than 5 V
Inactive: less than 1 V
Internal power supply (Pin 10 and 12 of J20)
Voltages: 5 V +/-5%
Maximum current 1A
Logical REVERSE and ODOMETER (Pin 6 and 8 of J20):
Maximum voltage (without polarization jumper): -50 V to 100 V
Maximum voltage (with polarization jumper): -34 V to +34 V
Input resistance (without polarization jumper): 10 k
Input resistance (with polarization jumper): 3.2 k
Active: greater than 4.5 V
Inactive: less than 3 V
Maximum odometer frequency: 2KHz
Logical Inputs (Pin 17 to 20 of J20):
LVTTL 3.3V inputs (Embedded 10K pull down)
Logical Outputs (Pin 21 to 23 of J20):
LVTTL 3V3 10mA
CAN Bus interface (Pin 15 and 16 of J20):
CAN2.0b Pelican
Bus driver : 82C251
Microphone input (J16):
Power supply: 5 V
+/-5%
Maximum peak to peak voltage: 0.5 V
Input resistance: 2.2 k
Audio outputs (J14):
Minimum RMS voltage at full scale: 1 V
Passband on 10 k: 20 Hz to 20 kHz
Audio amplifier (J9 and J10):
2x2W @ 4 ohms
2x1W @ 8 ohms
Summary of Contents for IHMI
