Actia IHMI, User Manual

Page: 31 / 52

DOC 02110-1 ACTIA PCs Page 31 / 52
Register 07h: FAN_TEMP (R/W)
Bits 7-0: fan temperature activation °C (not used)
Register 08h: START_TEMP (R/W)
Bits 7-0: max temperature startup condition °C
Register 09h: HIGH_TEMP (R/W)
Bits 7-0: max operating temperature °C
Register 0Ah: HYST_TEMP (R/W)
Bits 7-0: minimal restart temperature °C
Register 0Bh: SUSPEND_OUT (R/W)
Bits 7-0: max delay memory standby without ignition signal in minutes
Register 0Ch: NOCONTACT_OUT (R/W)
Bits 7-0: max delay without ignition signal in minutes
Register 0Dh: SHUTDOWN_OUT (R/W)
Bits 7-0: max delay before power off in minutes
Register 0Eh: TOOHOT_OUT (R/W)
Bits 7-0: max delay system to hot in minutes
Register 0Fh: CONTROL (R/W)
Bit 0: GSM wakeup enable (active at 1)
Bit 1: SMBus wakeup enable (active at 1)
Bits 3-2: not used
Bit 4: wakeup timer unit (0=seconds, 1=minutes)
Bits 7-5: not used
Register 10h: TIMER_LOW (R/W)
Bits 7-0: low byte of wakeup timer in seconds or minutes (cf. CONTROL)
Note: in order to get a consistent value, TIMER_LOW must be read before TIMER_HIGH.
Register 11h: TIMER_HIGH (R/W)
Bits 7-0: high byte of wakeup timer in seconds or minutes (cf. CONTROL)
Note: the wakeup timer is updated when TIMER_HIGH is written. TIMER_LOW must be write
previously. The timer down counting starts as soon as updated.
Register 12h: WAKEUP (R)
Bit 0: GSM wakeup flag
Bit 1: SMBus wakeup flag
Bit 2: not used
Bit 3: first power on flag
Bit 4: timer wakeup flag