![background image](http://html1.mh-extra.com/html/acti/enr-2000-series/enr-2000-series_system-administrator-manual_2842591040.webp)
www.acti.com
ENR-2000 Series System Administrator’s Manual
40
Network Settings
You may check the network adapter setting of
LAN1
and
LAN2
via the path:
Live
page
Select
Setup
click
“
System
” tab
click “
Network
”.
If you have done any change on
LAN1
,
LAN2
or
Port Mapping
tab, be sure to click “
Save
”
before you leave this page.
Configure LAN1 Settings
As
LAN1
port supports only
DHCP server
function. Without the DHCP client capability, it
cannot get IP from another DHCP server, and you will have to define its
IP Address
and
Subnet Mask
manually if necessary. The default IP is
192.168.0.10
.
Turn On/Off the DHCP Server
By default, the DHCP server is enabled. It will assign IP addresses to the cameras which are
in DHCP (client) mode. You may also define the range of assigned IP address.
Simply enable the DHCP Server by checking the box “
Enable DHCP Server
”, fill in the
beginning IP address in
Start IP Address
field, and the ending IP Address in
End IP
Address
field. The default range is
192.168.0.101~192.168.0.200
.