www.acti.com
ENR-2000 Series System Administrator’s Manual
22
Network Connection Architecture
When connecting ENR with your network, please make sure you plug the network cable into
the right port.
LAN 1 Port
LAN 1
port is the default camera port for a typical local network. Via this port, the DHCP
server built in ENR automatically assigns IP addresses to network cameras once they are
connected. With this feature, you do not have to bother arranging the camera IP addresses on
your own. By default, this DHCP server is enabled, so please avoid connecting ENR to a
network where exits another DHCP server via this port.
Connection Setting Example 1
Below diagram displays an example connection setting using only
LAN1
to connect networks
cameras.
In this setting, ENR altogether with cameras are within the same network segment; in the
mean time, there is no need of referencing outside DHCP server in this system.
LAN 1 Port (Camera Port)
Default:
192.168.0.10
LAN 2 Port (WAN Port)
Default:
Dynamic /192.168.1.10
192.168.0.101 ~ 192.168.0.104
LAN 1: 192.168.0.10
