Actel IGLOO PLUS Starter Kit, User Manual, Page: 8 / 62

Board Components and Settings
8 IGLOO PLUS Starter Kit User’s Guide
IGLOO PLUS Board Stackup
The IGLOO PLUS board is built on a 10-layer PCB. Figure 1-2 and Figure 1-3 on page 10 show the top (L1) and
bottom (L10) silkscreens. The full PCB design layout is provided on the Actel website, on the IGLOO PLUS Starter
Kit page:
http://www.actel.com/products/hardware/devkits_boards/iglooplus_starter.aspx . To view the PCB design
layout files, you can use the Allegro Free Physical Viewer, which can be downloaded from the Cadence Allegro
Downloads page.
1. Top Signal ( Figure 1-2 on page 9 )
2. GND 1
3. Signal
4. GND 2
5. PWR 1
6. PWR 2
7. GND 3
8. Signal
9. GND 4
10. Bottom Signal ( Figure 1-3 on page 10 )
Downloaded from Elcodis.com electronic components distributor