IGLOO PLUS Board Demo
54
IGLOO PLUS Starter Kit User’s Guide
The FET Truth Table (
Table 6-4
) shows the Flash*Freeze variants based on the FET I/O HOLD and resister pull
configured for this demo design. For the output FET LEDs, NORMAL represents the LED state before entering and
after exiting Flash*Freeze mode, while F*F Mode represents the LED state during Flash*Freeze mode.
Table 6-4 · FET Truth Table
Input
Output
FET
Switch 1
FET
Switch 2
P-Type FET LED D13
(active low): HOLD
P-Type FET LED D14
(active low): Pull-down
N-Type FET LED D15
(active high): Pull-up
NORMAL
F*F Mode
Normal
F*F Mode
Normal
F*F Mode
CLOSE (0)
CLOSE (0)
ON (0)
ON (0)
ON (0)
ON (0)
OFF (0)
ON (1)
CLOSE (0)
OPEN (1)
ON (0)
ON (0)
OFF (1)
ON (0)
ON (1)
ON (1)
OPEN (1)
CLOSE (0)
OFF (1)
OFF (1)
ON (0)
ON (0)
OFF (0)
ON (1)
OPEN (1)
OPEN (1)
OFF (1)
OFF (1)
OFF (1)
ON (0)
ON (1)
ON (1)
electronic components distributor
Summary of Contents for IGLOO PLUS Starter Kit
