8
ACT-HDC11FH/ACT-HDC13FH Manual
ACT-HDC 13FH Quick Installation Guide
1. Please read carefully these notes below before copying.
(1) ACT-HDC 13F supports all kinds of Image Copy such as IDE HDD copy to
IDE HDD; IDE HDD copy to SATA HDD; SATA HDD copy to IDE HDD;
SATA HDD copy to SATA HDD, and CF card copy to CF card, etc.
(2) ACT-HDC 13F supports one to 3 copying when you execute the copy between
IDE HDD and SATA HDD.
(3) ACT-HDC 13F also supports one to 3 copying when you execute the copy of CF
card to CF card through CF Reader.
(4) Before putting on your source HDD and target HDD, please confirm the power is
turning off, and then turn on the power to copy. After copying completely, first,
turn off the power, and then take away your HDD from ACT-HDC 112 SH.
(5) Before copying, please check again your source HDD whether is correct, you can
know this information in function 6 Select Source. If your source is SCSI HDD,
please check the SCSI ID, generally, the default is SCSI ID0. If your source is
IDE HDD, please check whether the IDE ID is ID0.
(6) Before copying, please check it again whether the capacity of the target HDD is
equal or more than the target.
(8)
Hi-Speed Data transferring Rate
:
8-1
：
IDE/SATA HDD copy to IDE/SATA HDD is about 30MB/sec
。
8-2
：
CF card copy to CF card is about 2MB/sec (Dependence on CF Type)
。
