13
ACT-HDC11FH/ACT-HDC13FH Manual
4.2 Compare
Function 2 Compare is to compare the data of the source hard drive and those of the
target hard drives.
Select function 2.
2.Compare HD
Press
ENT
to compare. The LCD will show the comparison information as follows.
Comp- 17MB/s
5%
28.5GB
33:30
When comparison comes to an end, the LCD will show the result as follows.
Compare OK: 1
Fail: 0
Diff: 0
4.3 PreScan
Function 3 PreScan is to scan if the source hard drive can be read correctly, and to
test the reading speed too.
Select function 3.
3.PreScan HD
Press
ENT
to prescan. The LCD will show the scanning information as follows.
Scan- 35MB/s 0%
28.5GB
13:30
When scanning finishes and the source hard drive can be read correctly, the LCD will
show the result as follows.
PreScan OK!
