19
ACT-HDC11FH/ACT-HDC13FH Manual
4.7 Adv Setup
Function 8 Adv Setup lets you change the system configuration. It includes Read Error Skip,
Update Firmware, Compare Firmware, Quick Erase HDD, H/W Diagnostic, and Load Default
as the figure on page 14 shows.
Press ESC for 3 seconds to enter Function 8.
4.7.1 Rescan Bus Delay
7-01. Adv Setup
Rescan Bus Delay
Press
ENT
. The default is 1Sec .
Rescan Bus Delay
1Sec
4.7.2 Read Error Skip
This is to ignore any error that occurs during copying. Under normal circumstances,
when an error occurs during copying, a message will appear on the LCD. Yet, you
can use Read Error Skip to neglect the bad sector of a hard drive.
7-02. Adv Setup
Read Error Skip
Press
ENT
to enter the following figure. The default is Off. Press
【
】
to select On.
Read Error Skip
Off
