ACT HDC11FH User Manual Download

Page: 20 / 24

ACT-HDC11FH/ACT-HDC13FH Manual

4.7.3 Update Firmware

Now press

ESC

and

【



】

to enter the following figure. This is to update

firmware to the latest version. But you should get the version first.

7-03. Adv Setup

Update Firmware

You can get the newest firmware version from ACT by e-mail, or download it directly from the

web site:

http://www.honetek.com.

Then, unzip the file but if the file is bin, you don’t

need to unzip. Copy the file to a blank disc using some recording software.

Turn off ACT-HDC11FH/ACT-HDC13FH and connect a DVD-ROM to its IDE0.

After turning on, place the disc containing the new firmware into DVD-ROM, and

press

ENT

. The system will begin searching the new firmware, and show the

message on the LCD after it finds it. Press

ENT

to update.

Searching F/W---

XXX/XXXXX

4.7.3 Compare Firmware

Now press

ESC

and

【



】

to enter the following figure. This is to compare the

current firmware version and the newly downloaded version. It can prove if the

downloaded version is the newest one.

7-03. Adv Setup

Compare

Firmware

4.7.5 Quick Erase HDD

Now press

ESC

and

【



】

to enter the following figure. This is to erase the data of

a hard drive quickly.

7-05. Adv Setup

Quick Erase HDD

Summary of Contents for HDC11FH

























Search results

Summary of Contents for HDC11FH

Reviews:

Related manuals for HDC11FH

Brands by name

Popular brands

ACT HDC11FH, User Manual

Search results

Summary of Contents for HDC11FH

Reviews:

Related manuals for HDC11FH

Brands by name

Popular brands