21
ACT-HDC11FH/ACT-HDC13FH Manual
Press
ENT
. Use
【
】or【
】
to select a hard drive on the IDE bus.
Select Target!
00 IDE0 Master
Press
ENT
. Use
【
】or【
】
to select Yes or No.
All data will be
Lost, erase? No
Use
【
】
to select Yes. After completion, the following figure will appear.
The Selected HD
Erase Finished!
4.7.6 H/W Diagnostic
Now press
ESC
and
【
】
to enter the following figure. This is to test the system.
7-06. Adv Setup
H/W Diagnostic
Press
ENT
to enter the following figure. The system will do the button test, self-test of
SDRAM, the hardware connection test and flash test. All test results will be shown on the
LCD. It is the easiest way to know if the system can work well.
LCD Test Start
When all tests finish, the LCD will show the message as follows.
Test finished
