19
Location
Both the units are not designed for outdoor installation. Install these units at the INDOOR area that provide
easy piping connections and enough space for service or repair works. The area or ceiling must be able
to withstand the unit weight and is isolated from noise and vibration. Ensure the area is free from water
leakage. Follow the recommended installation clearance as shown below:
Mounting
Both the units will be mounted on the ceiling by the support of four threaded rod. Use only the supplied
hanging bracket. Ensure that the support is strong enough and properly anchored to withstand the weight of
the unit.Use isolator rubber for better noise and vibration control. Do not locate the drainage system at any
point above the drain connection. Make sure water drainage is good and no leakage before.
Installation
Installation for outdoor unit AWSS
Unit: mm
800
500
800
1200
Summary of Contents for AWSS30A
