21
Preliminary Site Survey
Electrical supply and installation is to conform to local authority’s codes and regulations. (e.g. National
Electricity Board). Voltage supply fluctuation must not /- 10% of rated voltage. Electricity supply
lines must be independent of welding transformers which can cause high supply fluctuation. Ensure that the
location is convenient for wiring and piping.
Installation of Indoor Unit
The indoor unit must be installed such a way that there is no short circuit of the cool discharge. Comply to
the installation clearance recommended. Do not put the indoor unit where there is direct sunlight on the unit.
Make sure the location is suitable for piping and drainage. Precautions steps to be taken:
i) Use the hanger supplied with the unit.
ii) Ensure the support is strong enough to withstand the weight of the unit.
iii) Use the supplied drain socket to connect the drain pipe.
ACC 010C
ACC 015C
ACC 020C
Installation For Indoor Unit ACC
ACC 025C
Install the unit in such a way that the
condensate water can flow out
smoothly.
Summary of Contents for AWSS30A
