ACS TC 120, Operation And Instruction Manual, Page: 16 / 48

TC 120 682.98767.00 • 10/04/2018
16
2-5 Available Options
Temperature control unit systems are available with options to tailor the unit to your
requirements. Some are factory installed; some can be retro-fitted in the field. Consult
ACS Group sales for more information. Available TCU options include:
Digital flow meter with:

Up to 30 gpm (114 lpm) flow indicator
- or -
 30 to 60 gpm (114 to 227 lpm) flow indicator
- or -
 Greater than 60 gpm (> 227 lpm) flow indicator
1/16 DIN PID Temperature controller with:
 4-20 mA current control output
 Retransmission and remote set point; 4-20 mA, 2-10 V
 RS-232 or RS-485 communications (Modbus, SPI,
Ethernet)

Remote sensor; 10 ft. (3 m)

Remote controller enclosure

Heaters available in 12 kW, 18 kW, and 24 kW; 18 kW and
24 kW heaters available on 5 hp and 7½ hp (3.73 kW, 5.60
kW) direct-injection models only

3.7 sq. ft. closed-loop heat exchanger

Auto system water purge (mold purge)

Y-strainer

Hammer arrestor (water hammer shock stop)

Remote start/stop control

Rubber feet; available in lieu of casters

Non-ferrous brass construction

Slow-close cooling solenoid valves available in
1
/
2
” x
9
/
16
” (C
V
= 3.5) and
3
/
4
” x
3
/
4
” (C
V
= 5.5)

Modulating valves available in
1
/
2
” (C
V
= 0.4, 1.3, 2.2, or
4.4),
3
/
4
” (C
V
= 5.5 or 7.5), 1” (C
V
= 11), and 1
1
/
4
” (C
V
= 16)

Two-zone stack rack with casters; common wiring and piping
available

300ºF (149ºC) operation; includes silicon carbide seal