TC 120
682.98767.00 • 10/04/2018
11
Reporting a Safety Defect
If you believe that your equipment has a defect that could cause injury, you should
immediately discontinue its use and inform the manufacturer.
The principle factors that can result in injury are failure to follow proper operating
procedures (i.e. lockout/tagout), or failure to maintain a clean and safe working
environment.
Figure 1: Safety Tags and Warning Labels
Hazard Alert Symbol Description/Explanation
Preventative Maintenance
High Voltage Hazard. The electrical
enclosure is supplied with 3-phase
electrical power. Use caution when
using or maintaining this product.
Every six months inspect all
electrical connections for secure
attachment. For further information
see the Maintenance Chapter in this
manual
Hot Surface Hazard. When the unit
operates above 212F (100C) the
surface of the unit may reach excessive
temperatures. Use caution when using
or maintaining this product.
Every six months inspect all surfaces
for signs of heat degradation. If any
appear remove panel and verify
cause of degradation and repair.
Mandatory Symbol
Description/Explanation
Read Operators Manual. This equipment must be operated and maintained by
properly trained personnel. The information contained within this manual
must be read and understood prior to operating this equipment.
Lock Out. This equipment is operated with 3-phase electrical power.
Therefore, when performing any maintenance operations we recommend
following the local standards for performing a lock-out/tag-out procedure.
Wear Safety Gloves. This equipment operates above 212F (100C) and its
surfaces may reach excessive temperatures. We recommend that technicians
use safety gloves while performing maintenance to protect hands from being
exposed to these hot surfaces.
Disconnect before opening. Before servicing or maintaining the machine be
sure to disconnect the power and/or compressed air source to avoid electrical
shock and/or serious injury.
1-4
Warnings and Precautions
Our machines are designed to provide safe and reliable operation when installed and operated
within design specifications, and follow national and local safety codes.
To avoid possible personal injury or equipment damage when installing, operating, or
maintaining this machine, use good judgment and follow these safe practices:
Read and follow these operation and installation instructions when installing,
operating, and maintaining this equipment. If these instructions become
damaged or unreadable, additional copies are available from the manufacturer.