Chapter 1 For Your Safety Operation
S10 Screenless Granulator 882.12058.00
• 05-01-2019 2
2. Precautions for safety operation
These are general attention items for using this product safely.
WARNING
Rules must be followed
Illustration and Explanation
Sprue runners exceeding the specified
size cannot be ground.
Sprue
runner
overall
dimensions
W
mm 150
250
350
450
D
mm 240
240
240
240
H
mm 120
120
120
120
Φ
Dia. mm 7
7
7
7
Machine model
1/2
2/3
3/4
4/5
Any materials or objects other than
plastic runners cannot be ground.
e.g.
：
Molding rejects, mold cleaning material cannot be ground.
Sprue runners cannot be fed in large
quantities.
e.g.
：
This is strongly forbidden when fed manually or sprue
runners may pile up inside of the hopper, or inside the cutting
chamber.
Machine cannot be started with
material already inside the cutting
chamber.
For whatever causes the machine to stop, if you want to restart
it, you must clean and clear the inside of the cutting chamber
and hopper. If ignored, this may burn out the motor and motor-
starter.
If the machine stops due to the motor
starter overload-protection, immediate
resetting the thermal protector- or
starting the motor by force, are
prohibited.
You can't start the machine unless you clean and clear inside of
the cutting chamber and hopper and wait 5 minutes for a thermal
device to cool
; otherwise, non
-observance of this may result in
the motor and motor-starter being burned out.
Keep the label on the thermal protector
legible, and adjusting the amperage
dial at will, is forbidden.
1
）
Amperage-value adjustments at will severely affects the
normal function of the motor.
2
）
Man-made damage to any labels is outside the scope of the
warranty
，
and we are not responsible for any consequences
that occur.
Using a metal tool as a lever for
jammed cutters is prohibited.
Metal levers or wedges will cause cutter damage.
Running the gear motor in reverse is
not allowed.
1
）
Electric current value increases, and the motor burns out.
2
）
Plastic pellets will be cut in flakes, affecting its use.
Crushed material must be removed
from the material bin.
If material that was crushed gets piled up, it will impair internal
parts of the cutting chamber and over-stress the motor.
