Installation Manual
52
Turn Ignition ON
is displayed.
Ignition: OFF
and
Relay: ON
are displayed.
ATTENTION!
• Before starting the ignition, ensure that the vehicle is in the park or neutral
position, with parking brake engaged, to prevent the vehicle from moving
• Leaving the vehicle engine on for too long will cause the vehicle alarm horn to
sound
14. Turn the key to the
start
position.
The vehicle engine will start because the
Relay
is
On
.
Start Engine
is briefly displayed. Continue to the next section.
22.3 OBD-II Select
1.
OBD-II SELECT
is automatically displayed.
For conventional / non-hybrid vehicles, the ALCOLOCK LR
device must obtain a tach (rpm) reading from under the hood.
For non-hybrid vehicles with OBD-II, a tach signal may be
obtained by connecting the ECU to vehicle OBD-II.
For hybrid vehicles, tach is not available – an OBD-II speed
threshold is already programmed into the software. The ECU
must be connected to the vehicle OBD-II source.
2. Press
Select
to scroll to one of the 3 following options:
Summary of Contents for ALCOLOCK LR
