ACS ALCOLOCK LR, Installation Manual

Page: 51 / 72

Installation Manual
50
7. In the SERVICE menu, press Prev or Next to scroll to
Removal , then press Select .
Wait is briefly displayed as the removal procedure loads.
NOTE: REMOVAL
will display at the top of the screen during the HS
removal procedure.
8. HANDSET LED & Buzzer is displayed. The HS LED light
flashes from red to green to amber . On each flash, the HS
beeps with a descending pitch. After this sequence, OK
appears.
If there is no LED flash or HS beep, or “OK” is not displayed,
press and hold the bottom button to exit the procedure.
Restart the procedure and if the problem persists, check the
HS cable and replace the HS.
ECU Speaker is displayed. The HS LED light is off. The ECU
beeps and the pitch descends for three beeps. After this
sequence, OK is displayed.
9. If the test is successful, press OK .
If the ECU does not beep, or “OK” is not displayed, press and
hold the bottom button to exit the procedure.
Restart the procedure and if the problem persists, check the
ECU cable connections and replace the ECU.