А1270 Electro-Magnetic Ultrasonic Thickness Gauge
Operation Manual
11
ACOUSTIC
CONTROL
SYSTEMS
possible to view the selected sections of the signal, current parameters and settings, record the A-SCAN image together with the
measurement result in the present mode.
The SETUP mode allows the adjustment of the required measurement conditions and
parameters. A set of the editable parameters includes general parameters (common for all
modes) and parameters specific for each measurement mode.
1.3.4 Display
In all operation modes the upper line on the display indicates the information on the current
operation mode of the instrument and its battery charge level. Different icons of the operation
mode are listed in the Table 2.
Tab
Operation mode
MEMORY
B- SCAN
A-SCAN
SETUP
Table 2
Figure 5
The icons of the measurement modes always go from left to right as follows: MEMORY–B-SCAN
А SCAN. The icon of the active mode is highlighted (Figure 5).
When going to the SETUP mode, the setup icon is indicated on the display, the icon of the previ-
ous mode is no longer active, the parameters and settings of the mode can now be edited (Figure 6).
Figure 6
1
