
32
Technical Information
3. Firstly unfix two buckles on the grille as shown on the picture. Remove the screws under the buckles by a screwdriver and
then open the inlet grille.
U-Match Series DC Inverter Service Manual
64
(3) Firstly unfix two buckles on the grille as shown on the picture. Remove the screws under the
buckles by a screwdriver and then open the inlet grille.
Remove the screw
Figure 3-1-25
(4) Remove the screws shown on the picture. Push the side plate as per the arrowed direction and
take it down.
Remove the screw
Figure 3-1-26
(5) Put the hanger bolt into the clasp of the indoor unit and tighten screws on the hanger to prevent
the indoor unit from moving.
(6) Reinstall and tighten the right and left side panels.
Floor type
Left side panel
Wall
Paper tem
plate
Right side panel
Figure 3-1-27
5. Put the hanger bolt into the clasp of the indoor unit and tighten screws on the hanger to prevent the indoor unit from
moving.
6. Reinstall and tighten the right and left side panels.
4. Remove the screws shown on the picture. Push the side plate as per the arrowed direction and take it down.
U-Match Series DC Inverter Service Manual
64
(3) Firstly unfix two buckles on the grille as shown on the picture. Remove the screws under the
buckles by a screwdriver and then open the inlet grille.
Remove the screw
Figure 3-1-25
(4) Remove the screws shown on the picture. Push the side plate as per the arrowed direction and
take it down.
Remove the screw
Figure 3-1-26
(5) Put the hanger bolt into the clasp of the indoor unit and tighten screws on the hanger to prevent
the indoor unit from moving.
(6) Reinstall and tighten the right and left side panels.
Floor type
Left side panel
Wall
Paper tem
plate
Right side panel
Figure 3-1-27
U-Match Series DC Inverter Service Manual
64
(3) Firstly unfix two buckles on the grille as shown on the picture. Remove the screws under the
buckles by a screwdriver and then open the inlet grille.
Remove the screw
Figure 3-1-25
(4) Remove the screws shown on the picture. Push the side plate as per the arrowed direction and
take it down.
Remove the screw
Figure 3-1-26
(5) Put the hanger bolt into the clasp of the indoor unit and tighten screws on the hanger to prevent
the indoor unit from moving.
(6) Reinstall and tighten the right and left side panels.
Floor type
Left side panel
Wall
Paper tem
plate
Right side panel
Figure 3-1-27
Summary of Contents for AC Pro C Series
Page 90: ...Technical Information...