©2017 ACP, Inc.
Cedar Rapids, IA 52404
Page 9 of 16
Part No. 20000609
Revised 06/29/2017
Programming
What is stage
cooking?
Stage cooking enables
several different cooking cycles, or stages,
to be used consecutively without repeated
input from the user. Stage cooking can
be set to defrost food initially, then cook it,
and then keep the food warm until serving
time.
Programming Preheat
Setting
The convection temperature setting can
be set between 150°F to 475°F (65°C
to 250°C). It is recommended to set the
preheat setting to the most commonly
used temperature for that oven. The
factory default preheat setting is 475°F
(250°C).
To program the preheat setting
:
1. Turn oven on to set preheat.
2. Press Program Save pad.
3. Press Temp Entry pad.
4. Enter desired temperature by
using the numeric key pads.
• Temperature must be entered in
5°F (5°C) increments. If not, the
temperature will automatically
change to the nearest 5°F (5°C).
5. Preheat temperature is changed.
Programming Multiple Stages
Stage cooking allows consecutive cooking cycles without interruption.
Up to four different cooking cycles can be programmed into a memory
pad.
To use stage cooking:
1. Follow steps 1 through 6 above.
2. Press Stage pad.
• This will begin programming for the next cooking stage.
• Display indicates stage to be programmed.
• Enter cook time, temp and power level as in steps 4. 5 and 6.
• To enter another cooking stage for that pad, press Stage pad
again.
• Up to four different stages can be programmed.
3. Press Program Save pad to save the program and changes.
4. To discard changes, press Stop/Reset pad before pressing
Program Save pad.
Programming Pads
Oven is shipped from the factory for single digit programming. To
change the oven default to double digit programming, see
User
Option
section. To program the amount of time, power level, or
temperature setting for a pad:
1. Oven must be ON.
• Press Preheat On/Off pad.
•
Oven Preheating 475°F or 250
°
C
shows in display with
Oven Preheating
flashing.
2. Oven reaches preheat temperature.
•
Ready 475°F or 250
°
C
shows in display with
Ready
flashing. Press Program Save pad.
• Programming mode begins.
•
Enter Program to Add/Review:
shows in display.
3. Press pad to be programmed or reprogrammed.
• Display will change to review all settings for the pad.
• The pad number that is being programmed displays beside
the word
ITEM
.
4. Press Time Entry pad to program amount of cooking time.
• Enter desired cooking time by using numeric key pads.
• The total microwave cooking time (all stages combined) is
20 minutes.
5. Press Temp Entry pad to program the cooking temperature.
• Enter desired convection temperature by using numeric pads.
6. Press Power Level pad to program level of microwave power.
• For a lower microwave power, press pads 1 (for 10%) through
9 (for 90%).
0 turns off the microwave power and cooking
is by convection only.
• Press any numeric key pad twice to set power level back to
100%.
7. Press Program Save pad to save the program changes.
8. To discard changes, press Stop/Reset pad.
EXAMPLE OF STAGE COOKING CONDITIONS
Stage 1
Stage 2
Stage 3
Stage 4
Temp
450°F
(230°C)
450°F
(230°C)
450°F
(230°C)
450°F
(230°C)
Power
100%
30%
0
50%
Time
2:30
1:30
1:30
1:00