©2017 ACP, Inc.
Cedar Rapids, IA 52404
Page 16 of 16
Part No. 20000609
Revised 06/29/2017
PROBLEM
POSSIBLE CAUSE
Oven does not operate.
Confirm oven is plugged into dedicated circuit.
Confirm oven is on grounded circuit.
(Contact electrician to confirm)
Check fuse or circuit breaker.
Oven operates intermittently or
HOT
shows in display.
Check air filter and discharge areas for obstructions.
If oven does not accept entries
when pad is pressed.
Make sure oven is on and preheated.
Open and close oven door. Press pad again.
If oven malfunctions or shows:
ERROR!
ERROR CODE: 1
(example)
Oven control is equipped with a self-diagnostic system. Self-diagnostic
system alerts you if there is an error or problem. When electronic control
signals a problem, follow steps listed below.
1. Record number shown. (example of Error Code: 1 shown)
2. Unplug oven, wait for 1 minute. Then plug in oven.
• If code does not reappear, continue normal use with the oven.
• Disconnecting electrical supply may eliminate service code.
• If failure continues, contact an authorized servicer.
Do not use oven
until contacting the ACP Servicer.
Oven fan turns on while oven is
not preheating or cooking.
Normal operation.
Before Calling for Service
F
or full product documentation visit:
www.acpsolutions.com
⚠
WARNING
To avoid electrical shock which can cause severe personal injury or death, do not remove outer case at any time.
Only an authorized servicer should remove outer case.
This is a Class A product. In a domestic environment this product may cause radio interference in which case the
user may be required to take adequate measures.
