©2017 ACP, Inc.
Cedar Rapids, IA 52404
Page 8 of 16
Part No. 20000609
Revised 06/29/2017
Display and Features (cont’d)
Start pad
The Start pad is used to
begin a manual time entry
cooking cycle.
Temperature warnings
The combination oven has two
distinct temperature warnings.
Warnings sound with a three beep
signal when a programmed pad is
pressed. Warnings are:
•
A warning when the preheat
temperature does not match the
preprogrammed temperature of a
cooking condition.
•
A warning when the actual oven
cavity temperature is not to
preheat temperature, such as
when the oven is first started.
To override the warning and begin a
cooking cycle, press the Start pad. To
turn off warnings, see
User Options
section.
Stop/Reset pad
The Stop/Reset pad stops
a cooking sequence
in progress, clears out
any remaining time, and also ends
a programming or user option cycle.
When the Stop/Reset pad is used to
end a programming or option change,
the changes are discarded.
Cooking Display
DISPLAYS
DESCRIPTION
OVEN PREHEATING
475
o
F
Oven Preheating 475°F or 250°C
displays
when oven is turned on and is warming up to the
selected preheat temperature.
Oven Preheating
also flashes when a cooking condition can be
started or programmed.
READY
475
o
F
Ready 475°F or 250°C
displays when oven has
reached preheat temperature and is ready to cook.
Ready
also flashes when a cooking condition can
be started or programmed.
Note: Oven will shutdown after two hours of
inactivity.
00:00
Displays cooking time. If stage cooking is
programmed, total cooking time is displayed
MW 50%
MW 50%
displays the current microwave power
level. 100% is the highest setting, and 0% is
lowest (no microwave energy used).
ITEM-05
ITEM-05
displays the single or double digit entry
of a programmed cooking condition when using a
programmed pad.
STAGE 1
STAGE 1
displays the stage number (1 through 4)
the oven is at in the cooking condition
STANDBY
STANDBY
displays when oven is turned off,
and also after the oven is plugged in, the door is
opened, and then shut.
Programming Display
DISPLAYS
DESCRIPTION
ENTER PROGRAM
TO ADD/REVIEW:
Displays when oven is in programming mode for
single digit or double digit memory.
STAGE 1
Displays stage number during cooking or when
programming a specific cooking stage. Stage
number
(1 through 4) indicates the stage that is being
used.
USB Display
DISPLAYS
DESCRIPTION
USB
Displays when keypad 5 is pressed and held and
transfer to or from USB flash drive is ready
