ACO 6236, Instruction Manual, Page: 90 / 154

6
Setting of 【 Auto 】 mode
Mode
：
Auto
：
Automatic measurement, where the following items are available.
Interval
：
Measuring interval setting
Single
：
The measurement starts with [Start/Stop] key and is terminated at
Meas Time selected.
Repeat
：
The measurement starts with [Start/Stop] key and is repeated in
every Meas Time selected until [Start/Stop] key is pressed.
I/O
：
External output setting
OFF
：
Default (Data output is disabled).
ON
：
Outputs data for one second when the data mory mode is active.
Level
：
Threshold level is registered.
Samp Time
：
Mese Time
（
Fixation
）
Sta
：
Registers the starting time for recording (YY/MM/DD HH/MM/SS)
(Year/Month/Date, date time/minute/second).
Stp
：
Registers the stop time for recording (YY/MM/DD HH/MM/SS)
(Year/Month/Date, date time/minute/second)
≪
Interval
：
Single At time of setting
≫
After progress of registered record start time (Sta), if instantaneous value is beyond a set point,
I record for once of “Meas Time”.
The record end doesn't relate at setting level and record stop time (Stp) of the registered
instantaneous value.
≪
Interval
：
Repeat At time of setting
≫
After progress of registered record start time (Sta), if instantaneous value is beyond a setting
level, record it during one second by setting time.
It records Meas.Time or Samp Time intervals repeatedly.
Level of instantaneous value is less than a setting level or records it until record stop time.
instantaneous
value
setting
Sta
Record start Record end
Meas.Time
Stp
Time
Instantaneous
value
setting
Sta
Record start
Meas.Time
Record end
Stp
Time
Level
Instantaneous
value
setting
Sta
Meas.Time
１
2
3 4
Stp
Record start
Record end
Instantaneous
value
setting
Sta
Record start
Meas.Time or Samp Time
Stp
１
2 3
Record end
4