ACO 6236, Instruction Manual

Page: 143 / 154

52
7. Click [Connect TYPE 6236] on the Tool Bar and TYPE 6236 and PC will be connected.
【 When TYPE 6236 is not connected 】 【 When TYPE 6236 is connected 】
<Note>
a. When the SD card in the TYPE 6236 is changed, card type shall be changed as well using the
[Card] button on the Remote Control Panel.
b. If the TYPE 6236 is connected after the Data Management Software was started, search for
the COM port shall be performed again.
c. If the COM port number of the connected USB Interface Cable is not indicated on the Remote
Control Panel, search for the COM port shall be performed again.
d. If the connection with the TYPE 6236 is broken for some reason, such as disconnection of the
USB Interface Cable, etc., such message will be displayed or there will be no response.
Re-check the connection while the TYPE 6236 and re-start the Data Management Software.
(During remote control operation, or “in connection”, do not connect/disconnect USB Cable.
Disconnection operation with the TYPE 6236 shall be made first and then disconnect the
USB Cable.)
e. Remote control operation with the Real Sound Recording Card inserted to the TYPE 6236 is
not supported.
7.2 Change setting of the TYPE 6236
When the connection with the TYPE 6236 is completed, Property Panel will display information
for the setting of the TYPE 6236.
If it is necessary, change the setting of the TYPE 6236 per following procedure.
1. Change the setting by clicking operation buttons on the remote control panel, or right-click
setting values on the property panel and select desired value on the shortcut menu.
On the property panel,
select the setting value to
change by right-clicking.
Shortcut menu will
be displayed.
The color of the
column for the
selected value will
be changed to
blue.