ACO 6236, Instruction Manual, Page: 26 / 154

25
＜ Memory ＞ (2/3)
Items Default Contents
● Mode ： Normal ： Normal ： Basic setting
Auto ： Automatic measurement, where the following
items are available.
Start ： Start of power supply ON automatic measuring
system.
（ It records on the memory card simultaneously ）
● Interval ： Single ： Measuring interval setting
Single
： The measurement starts with [Start/Stop] key
and is terminated at Meas.Time selected .
Repeat ： The measurement starts with [Start/Stop] key
and is repeated in every Meas.Time selected until
[Start/Stop] key is pressed.
【 When Mode ： Auto is selected, the following items can be specified 】
● I/O ： OFF ： External output setting
OFF
： Default (Data output is disabled).
ON ： Outputs data for one second when the data
mory mode is active.
● Level ： 65dB ： 65dB ： Threshold level is registered (when the level
exceeds it, recording starts), within the range
20-130dB at resolution 1dB
● Samp Time ： Meas.Time ： Meas.Time ： sampled at interval equal to Meas.time.
100ms ： sampled at interval 100ms (0.1s).
200ms ： sampled at interval 200ms (0.2s).
1s ： sampled at interval 1s
Meas.Time is time set with [Meas.Time] key (1s ～ - ･･･ ).
＊ Select 10s or more in L
Atm5
measurement.
● Sta ： Registers the starting time for recording (YY/MM/DD HH/MM/SS)
(Year/Month/Date, date time/minute/second)
● Stp ： Registers the stop time for recording (YY/MM/DD HH/MM/SS)
(Year/Month/Date, date time/minute/second)
Fixed to Mease Time, when when RSR card is installed.
Select to
Mode:Auto
Select to
Mode:Start
<Memory> 2/3
Mode ：Normal
Interval ：Single
<Memory> 2/3
Mode ：Auto
Interval ：Single
I/O ：OFF
Level
： 65dB
Samp Time ：MeasTime
Sta：08/10/10 18:16:00
Stp：08/10/12 20:16:00
<Memory> 2/3
Mode ：Start
Interval ：Repeat
I/O out ：232C