ACO 6236, Instruction Manual, Page: 65 / 154

64
8)Other (
Common for program card)
①
Calibration
“ C ” ： transmit → reply ： ”c”
② Back Light
“
L
” ：
transmit
→
reply
：
”l”
③ Range setting
“ R0 ” ： transmit → no reply
④ Filter setting
“ A0 ” ： transmit → no reply
9)Setting confirmation command (Operation to recall the current settings
)
Check the range and frequency weighting characteristics in the same way as in
normal measurement.
Change the setting with command “F” if necessary.
10)Start/Data collect/Stop
6236 PC
Calibration ※ Stop is command “E”
LED backlight lighting ※ Turn off is command “E”
Range setting
R0
：
130dB, R1
：
120dB, R2
：
110dB,
R3 ： 100dB, R4 ： 90dB, R5 ： 80dB,
Filter setting
A0
：
A-weighted A1
：
C-weighted A2
：
Z-weighted
s
S
reply
r
r
r
Data acquired
Send command “ S ” and start measurement with
the settings.
・ After pass time of MeasTime, “ r ” is returned and
recorded in the memory card. then data cannot
collect.
・ Case of Repeat 、 “ r ” is returned every MeasTime
and recorded in the memory card.
※ After this, inhibiting any other key access
than ”E” command.