ACO 6236, Instruction Manual, Page: 145 / 154

54
7.4 Measurement
To start measurement by remote control, perform either of the following operation.
* Click [Start/Stop] button on the remote control panel.
* Select [Remote operation]→[Start measuring] on the Menu Bar.
* Click [Remote-control operation of the measurement] on the Tool bar.
When the measurement is started, measurement data will be displayed on the Measurement
data display area. To stop the measurement, click [Start/Stop] button on the remote control
panel. If the measurement fulfilled the condition set for the termination of measurement, the
measurement operation will be automatically stopped.
【 Start measurement 】
【 Stop measurement 】
Measured data are recorded as measurement data files. Route folder for the data storage is
the folder set at the [Backup setting] of [Settings]→[Application settings]→[Backup setting].on
the Menu Bar.
Folders for each card type will be created under measurement data file folder and data are
stored in such folders.