Acnodes RMC 7152 User Manual Download

Page: 67 / 68

14628 Central Blvd,

Chino, CA91710

tel:909.597.7588, fax:909.597.1939

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

RMC 7152

14” short depth server

RMC 7152

14” short depth server

RMC 7152

14” short depth server

Appendix B Installing Windows

After all hardware components have been installed, you must first configure Intel South Bridge RAID Settings before you install

the Windows OS and other software drivers. To configure RAID settings, please refer to RAID Configuration User Guides posted

on our website at www.supermicro.com/support/manuals.

B-1

Installing Windows to a RAID System

1. Insert Microsoft's Windows Setup CD in the CD drive and the system will start booting up from CD.

2. Press the <F6> key when the message "Press F6 if you need to install a third party SCSI or RAID driver" displays.

3. When the Windows setup screen appears, press "S" to specify additional device(s).

4. Insert the driver diskette "Intel AA RAID XP/2003/2008/Vista Driver for ICH10R" into the floppy drive and press the <Enter>

key.

5. Choose the Intel(R) ICH10R SATA RAID Controller from the list indicated in the Windows setup screen, and press the

<Enter> key.

6. Press the <Enter> key to continue the installation process. (If you need to specify any additional devices to be installed, do

it at this time.) Once all devices are specified, press the <Enter> key to continue with the installation.

7. From the Windows OS setup screen, press the <Enter> key. The Windows setup will automatically load all device files and

then continue the installation.

8. After the Windows installation is completed, the system will automatically reboot.

B-2

Installing Windows to a Non-RAID System

1. Insert Microsoft's Windows setup CD in the CD drive and the system will start booting up from CD.

2. Continue with the OS installation. The Windows OS Setup screen will display.

3. From the Windows setup screen, press the <Enter> key. The Windows setup will automatically load all device files and

then continue with the installation.

4. After the Windows installation is complete, the system will automatically reboot.

5. Insert the Supermicro setup CD that came with your motherboard into the CD drive during system boot, and the main

screen will display.

Summary of Contents for RMC 7152





































































Search results

Summary of Contents for RMC 7152

Reviews:

Related manuals for RMC 7152

Brands by name

Popular brands

Acnodes RMC 7152, User Manual

Search results

Summary of Contents for RMC 7152

Reviews:

Related manuals for RMC 7152

Brands by name

Popular brands