Acnodes RMC 7152 User Manual Download

Page: 48 / 68

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

PC 5150

15-inch touch panel PC

RMC 7152

14” short depth server

14628 Central Blvd,

Chino, CA91710

tel:909.597.7588, fax:909.597.1939

System Overview: The following BIOS information will be displayed

System Time/System Date

Use this option to change the system time and date. Highlight System Time or Sys- tem Date using the arrow keys. Key in

new values through the keyboard and press

<Enter>. Press the <Tab> key to move between fields. The date must be entered in Day MM/DD/YY format. The time is

entered in HH:MM:SS format. (Note: The time is in the 24-hour format. For example, 5:30 P.M. appears as 17:30:00.)

Acnodes

o Version: This item displays the BIOS revision used in your system.

o Build Date: This item displays the date when this BIOS was completed.

Processor

The AMI BIOS will automatically display the status of the processor used in your system:

o CPU Type: This item displays the type of CPU used in the motherboard.

o Speed: This item displays the speed of the CPU detected by the BIOS.

o Physical Count: This item displays the number of processors installed in your system as detected by the BIOS.

o Logical Count: This item displays the number of CPU Cores installed in your system as detected by the BIOS.

System Memory

This displays the size of memory available in the system:

o Populated Size: This item displays the installed memory size detected by the BIOS.

o Available Size: This item displays the available memory detected by the BIOS.

7-3

Advanced Setup Configurations

Use the arrow keys to select Boot Setup and hit <Enter> to access the submenu items:

Summary of Contents for RMC 7152





































































Search results

Summary of Contents for RMC 7152

Reviews:

Related manuals for RMC 7152

Brands by name

Popular brands

Acnodes RMC 7152, User Manual

Search results

Summary of Contents for RMC 7152

Reviews:

Related manuals for RMC 7152

Brands by name

Popular brands