14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
RMC 7152
14” short depth server
RMC 7152
14” short depth server
11
RMC 7152
14” short depth server
Installing the Rack Rails
Determine where you want to place the RMC 7152 in the rack (see Rack and Server Precautions in Section 2-3). Position the
fixed rack rail/sliding rail guide assemblies at the desired location in the rack, keeping the sliding rail guide facing the inside of
the rack. Screw the assembly securely to the rack using the brackets provided. Attach the other assembly to the other side of
the rack, making sure that both are at the exact same height and with the rail guides facing inward.
Installing the Server Into the Rack
You should now have rails attached to both the chassis and the rack unit. The next step is to install the server into the rack. Do
this by lining up the rear of the chassis rails with the front of the rack rails. Slide the chassis rails into the rack rails, keeping
the pressure even on both sides (you may have to depress the locking tabs when inserting). See Figure 2-3.
When the server has been pushed completely into the rack, you should hear the locking tabs "click".
