Aclara SGM1400 Series, User Manual

Page: 30 / 108

20
S G M 1 4 0 0 S e r i e s S m a r t M e t e r U s e r M a n u a l – S M E T S 2
Push Buttons
Number of Decimal Places
This specifies the number of decimal places to display,
Additional Information
This specifies the additional information for the following unique display items.
• For prepayment data, this field is configured with the Attribute ID.
• For serial numbers, this field must be configured with:
For details on Prepayment Attribute IDs, refer to the Meter Config Tool software.
Push Buttons
Two push buttons (A and B) on the meter face grant the customer a means to
restore supply and manual cycle through the display screens.
Push Button A
Push button A is used to manually scroll through custom display items within the
user-configurable display modes. Each button press manually advances to the next
item in the display. The manual scroll mode will revert back to automatic scrolling
after a number of seconds have elapsed without button A being pressed. This
pre-set period of time is known as the manual scroll timeout. This button is also
used to acknowledge successful, failed, or timed-out HAN join events when
prompted by the LCD display.
Push Button B - Sealable
Push button B, when not sealed, is used to navigate through the various display
modes. Each press of this button will advance to the next display mode.
Default 0
Minimum 0
Maximum 2
Meter serial number 0
COMM module serial number 1
All other display items 2
1.
Primary
5.
Engineering Menu
2.
Alternate 1
6.
HAN Signal Strength
3.
Alternate 2
7.
Active TOU
(specific firmware versions)
4.
Alternate 3 (prepayment menu)
8.
Privacy PIN