4
8. I/O : RS-232C, Sensor input/Relay output
Notice : When connecting with other applications, be sure to turn off the system.
Notice : Improper power connection to DVR unit will damage the system.
1. TERATRAY CONNECTION : Connects to HDD Bay(Tera-Tray)
2. TRIGGER : Connects to trigger output of multiplexer(recording syncronize)
3. ETHERNET : Connects to LAN, WAN, or Internet to access DVR unit via IP network
4. CAMERA : Connects to camera
5. LOOP : Loop out
6. VCR : Connects to VCR for backup
7. MONITOR : Connects to monitor
9. DC 12V : DC 12V connection port
ALL ABOUT IMAGE RECOGNITION & PROCESSING
1 channel stand-alone DVR
3. Unit sedcription
2) Rear panel
ETHERNET
1
2
8
TRIGGER
rks
TERATRAY CONNECTION
CAMERA
LOOP
VCR
MONITOR
DC 12V
C
o
m
m
P
o
r
t
I/O
3
4
5
6
7
9
25
3. Example of schedule setting
4. Note
for schedule recording :
01:00-03:00 ON
04:00-05:00 ON
1
2
3
Just record from 1 to 3 and from 4 to 5, and does not record for the rest of hours.
01:00-03:00 OFF
04:00-05:00 OFF
Just not record from 1 to 3 and from 4 to 5, and record for the rest of hours.
01:00-03:00 ON
04:00-05:00 OFF
Just record from 1 to 3 and not record for the rest of hours(In case ON and OFF are exists, the
system give priority to ON.
PANTILT COMMAND SETUP
SELECT , PRESS ENTER
Display of PANTILT COMMAND
SYSTEM SETUP
DISPLAY SETUP
CAMERA TITLE
TIME/DATE SETUP
ALARM/MOTION SETUP
RECORD SETUP
TCP/IP SETUP
MISCELLANEOUS
FACTORY DEFAULT
BUZZER SETUP
ID/PW SETUP
SCHEDULE REC SETUP
PANTILT CMD SETUP
HDD INFORMATION
MARK IMAGE SETUP
PRODUCT ID
4
HDD INFORMATION
5
1) HDD DATA LIST : Show general information of HDD
ALL ABOUT IMAGE RECOGNITION & PROCESSING
1 channel stand-alone DVMR
5. Operation
If you set scheduled recording, DVMR unit does not record before the set time. It only starts recording
at START time and ends at END time.
PANTILT CMD SETUP : If you want to connect PTZ camera which is not included in the list of PTZ
camera, you have to input protocol of PTZ camera you are going to connect to DVMR unit.
You can input protocol of PTZ camera you are going to connect in USER DEFINE SETUP
For details, refer to Manual for incorporating PTZ protocols.
DRX-502A
485 BAUD : 9600
USER DEFINE SETUP
>
1. USER DEFINE
2. DRX-502A
3.AECD-2000
4. HMC250
5. PELCO D type
1200
2400
4800
9600
19200
By pressing [ENTER] button, you can select type of PTZ camera and also baud rate of RS-485 communication