7) Power connection
9) Detail setup in SYSTEM SETUP
For detail setup, refer to the instruction of SYSTEM SETUP.
Connect the power to the POWER CONNECTION on the rear panel of the system, and
turn on the switch.
8) Turn on the POWER and Log-in the the system
Follow direction in the Log-in part of this manual to input the PASSWORD and start the system.
8
DC 12V
Factory default password for account manager is
“
1
”
, and
“
2
”
for user.
ALL ABOUT IMAGE RECOGNITION & PROCESSING
1 channel stand-alone DVR
4. Installation
6. RECORD SETUP
1
2
HDD CLEAR : If YES is selected, it deletes contents of the HDD.
Notice : Be careful to delete data on HDD, because you can not recover deleted data.
21
RECORD MODE
3
1) TIMER : Records at a certain time interval set at RECORD SPEED.
2) TIMER+ALARM : Combination of TIMER and ALARM. If alarm is activated, the system
records at its maximum recording rate(60 FPS) for ALARM DURATION.
4) ALARM : The system just records when motion is detected, and records when alarm
is activated for ALARM DURATION at 60 FPS.
3) MOTION : The system records just when motion is detected for MOTION DURATION.
RECORD SPEED : Adjust recording frame rate. 0.1 indicates 1 field per 10 second.
4
(Select any one among 60/30/15/10/5/2/1/0.5/0.2/0.1 FPS)
SYSTEM SETUP
DISPLAY SETUP
CAMERA TITLE
TIME/DATE SETUP
ALARM/MOTION SETUP
RECORD SETUP
TCP/IP SETUP
MISCELLANEOUS
FACTORY DEFAULT
HDD CLEAR
HDD FULL
RECORD MODE
RECORD TYPE
RECORD SPEED
PRIORITY MODE
Using button, set HDD CLEAR at YES and press [MENU] button.
You will see messages on the right, and then press [ENTER] button to delete all image data on HDD.
5) MUX/REC : Select when you use this DVMR in connection with multiplexer, replacing time lapse VCR.
<CAUTION>
IF YOU WANT TO DELETE
PRESS <ENTER> KEY
MUX CH NUMS : When you use this DVMR unit in connection with multiplexer, replacing time lapse VCR,
set numbers of camera connected to multiplexer.
5
ALL ABOUT IMAGE RECOGNITION & PROCESSING
1 channel stand-alone DVMR
5. Operation
RECORD SETUP
HDD CLEAR
HDD FULL
RECORD MODE
RECORD SPEED
MUX CH NUMS
SELECT , PRESS
: NO
: OVERWRITE
: TIMER
: 60FPS
: 16CH
1
2
3
4
5
>
Display of RECORD SETUP
Tape recording hour : 2 4 8 72 960
(based on 2 hrs tape)
HDD FULL : You can select OVERWRITE or STOP RECORDING using button. When HDD is full, the
system deletes old data to record current pictures, if you set at OVRWRITE. It stops and shows warning message
when it is full, if set at STOP RECORDING.
If you selected MUX/REC in RECORD MODE, you are requested to select record speed from 001
to 480. This is to synchronize with switching time of multiplexer, that is, recording hour of tape
in former time lapse VCR.
Set speed : 002 004 006 ------------------ 072 -------------------------------------960