11
3. Sensor recording
Refer to REC MODE SETUP in
5
-
4
- 5 - (RECORD SETUP) in page 21 for more detail of TIME+ALARM OR
ALARM and ALARM SETUP
5
-
4
- 5 - in page18(alarm setup) for more detail of ALARM
DURATION.
5. Recording by MOTION DETECTION
Refer to ALARM/MOTION SETUP in
5
-
4
- 5 from page 18
to 20. It must be set at MOTION or MOT+ALM to record
whenever motion is detected.
1) When there is sensor input, recording starts. 2) It records for preset period of time.
For more details, refer to SCHEDULE REC SETUP in MISCELLANEOUS SETUP in
5
-
4
- 8 - in page 24
4. Scheduled recording
3
1
3
6. Attention
1) Recording is stopped during SYSTEM SETUP.
2) Recording is stopped during playback or when in SEPUP
menu.
3) Recording is not possible if no camera is connected.
ALL ABOUT IMAGE RECOGNITION & PROCESSING
1 channel stand-alone DVR
5. Operation
RECORD SETUP
HDD CLEAR
HDD FULL
RECORD MODE
RECORD SPEED
MUX CH NUMS
SELECT , PRESS
: NO
: OVERWRITE
: MOT+ARM
: 60FPS
: 16CH
MOT+ALARM : Records when motion detected or when alarm is activated for preset duration time in above example.
>
Or set at
TIM+ARM
ALARM SETUP
ALARM SIGNAL
> ALARM DURATION
SELECT , PRESS
: N.C
: 20 SEC
Set duration of
alarm
1
2
Records as scheduled, and setting can be done by date or by day of the week.
For each day, 2 different time intervals can be set at ON or OFF in the unit of 30 minutes, and same for each
day of the week. Therefore users can set 4 recording time intervals of recording or not recording for every day.
RECORD SETUP
HDD CLEAR
HDD FULL
RECORD MODE
RECORD SPEED
MUX CH NUMS
SELECT , PRESS
: NO
: OVERWRITE
: MOTION
: 60FPS
: 16CH
>
or
MOT+ARM
Display of RECORD MODE
5. ALARM/MOTION SETUP
1
ALARM SETUP : Sets type of sensors connected to DVMR unit.
OFF : Not in use.
NC : Normal closed. When an event happens, contact is opened.
NO : Normal open. When an event happens, contact is closed.
ALARM DURATION : Duration of recording when an ALARM is activated.
18
2
ALARM SETUP
> ALARM SIGNAL
ALARM DURATION
ELECT LIST TYPE
SELECT , PRESS
: N.C
: 20 SEC
: ALM
SYSTEM SETUP
DISPLAY SETUP
CAMERA SETUP
TIME/DATE SETUP
ALARM/MOTION SETUP
RECORD SETUP
TCP/IP SETUP
MISCELLANEOUS
FACTORY DEFAULT
ALARM SETUP
ALARM LIST SETUP
MOTION SETUP
MOTION MASK SETUP
ALARM LIST SETUP
SELECT , ENTER , MARK
DATE
> --/--/--
--/--/--
--/--/--
--/--/--
--/--/--
TIME
--/--/--
--/--/--
--/--/--
--/--/--
--/--/--
ALM
--/--/--
--/--/--
--/--/--
--/--/--
--/--/--
SORT DELETE GOTO
SYSTEM SETUP
DISPLAY SETUP
CAMERA SETUP
TIME/DATE SETUP
ALARM/MOTION SETUP
RECORD SETUP
TCP/IP SETUP
MISCELLANEOUS
FACTORY DEFAULT
ALARM SETUP
ALARM LIST SETUP
MOTION SETUP
MOTION MASK SETUP
A: ALARM
L : LOSS
M : MOTION
Playback from GOTO
time
(set time : 10, 20, 30, 40, 50 sec, 1 MIN, 3 MIN, 5 MIN)
ALL ABOUT IMAGE RECOGNITION & PROCESSING
1 channel stand-alone DVMR
5. Operation
Using button, move to any of SORT/DELETE/GOTO
Display of ALARM LIST SETUP
Display of ALARM SETUP
ALARM LIST SETUP : Shows list of alarms up to 400. If total alarm exceeds 400, it overwrites from
the beginning. Alarm list is very useful to manage DVMR system, in case it is in use in connection
with alarm sensors.
SELECT LIST TYPE : “A” indicates Alarm, “L” indicates Loss, and “M” indicates Motion.
You can select group of events, NONE, A, L, and M, by pressing [left] and
[RIGHT] buttons. If you select NONE, no event list shall be provided.
