0-20
Altos 9100B System Guide
7.
Connect all the power supply cables to the connectors on the
power sharing board. Make sure to connect the connectors of
power supply 1 to the three upper connectors on the power
sharing board. Connect the connectors of power supply 2 to the
three lower connectors on the power sharing board.
The power connectors are foolproof and
connect only in one direction. If a connector
does not fit in completely, reverse its
orientation then try to reconnect.
8.
Arrange all the cables from the power sharing board and fans to
facilitate connection to the system board and disk drives. Do not
let power cables block the housing exhaust and fans.
9.
Close the right door completely and secure it with the screws that
you removed earlier.
10. Reconnect the fan connectors.
11. Reconnect the system board power connectors.
Cable connections for
power supply 2
Cable connections for
power supply 1
Power sharing board
Summary of Contents for Veriton 9100
