BIOS Utility
3-23
Onboard Devices Configuration
Page 2/2
Onboard Floppy Disk Controller ......[Disabled]
Onboard IDE Primary Channel .........[Enabled ]
Onboard PS/2 Mouse (IRQ 12) .........[Enabled ]
Onboard USB .........................[Disabled]
USB Legacy Mode ..................[--------]
Onboard SCSI1 .......................[Disabled]
Boot from SCSI1 Device ............[Enabled ]
Onboard SCSI2 .......................[Enabled ]
Boot from SCSI2 Device ............[Enabled ]
Onboard Ethernet Chip ...............[Disabled]
↑↓
= Move Highlight Bar,
→
←
= Change Setting, F1 = Help
PgDn/PgUp = Move Screen
Serial Port 1
This parameter allows you to enable or disable the serial port 1. The
Base Address and IRQ items are configurable only if this parameter is
enabled.
Base Address
This function lets you set a logical base address for serial port 1. The
options are:
•
3F8h
•
2F8h
•
3E8h
•
2E8h
IRQ
This function lets you assign an interrupt for serial port 1. The options
are IRQ
3
and
4
.
Summary of Contents for Veriton 9100
