1-16
Altos 9100B System Guide
Error Messages
Do not continue using the computer if you receive an error message
of any type. Note the message and take corrective action. This
section explains the different types of error messages and
corresponding corrective measures.
There are two general types of error messages:
•
Software
•
System
Software Error Messages
Software error messages are returned by your operating system or
application. These messages typically occur after you boot the
operating system or when you run your applications. If you receive
this type of message, consult your application or operating system
manual for help.
System Error Messages
A system error message indicates a problem with the computer itself.
A message of this type normally appears during the power-on self-
test, before the operating system prompt appears.
Message
Action
CMOS Battery Error
Replace the RTC chip or
contact your dealer.
CMOS Checksum Error
Check the RTC chip and the
necessary jumper. If the
battery is still good, run
Setup.
Display Card Mismatch
Run Setup.
Summary of Contents for Veriton 9100
