manualshive.com logo in svg

Acer V70LA, Technical Manual

Share
Download
Acer V70LA Technical Manual Download Page 29

Load Default Settings

A26361-K522-Z120-2-7419

English - 29

Plug & Play OS

defines the Plug&Play functionality. Plug&Play means that inserted modules are automatically
recognized and installed if they support Plug&Play.

Yes

The operating system takes over some of the Plug&Play functions. You should
select this setting only if the operating system supports Plug&Play.

No

The BIOS takes over the complete Plug&Play functionality.

Reset Resource Assignments

This field specifies whether the configuration data is reset and reinitialized when the system is
started.

Yes

After the system is started, the configuration data is reset, and the entry in this field
is set to 

No

. The new configuration data is determined by means of the Plug&Play

functionality. The mounted modules and drives are then initialized with this data.
Non-Plug&Play components must be entered manually.(e. g. Windows 95, ICU).

No

After the system is started, the Plug&Play functionality ascertains the current
configuration data and uses this data to initialize the installed boards and drives. The
configuration data of non-Plug&Play components are not reset.

Load Default Settings

You need to reload the BIOS default settings every time you make changes to your system
hardware configuration (such as memory size, CPU type, hard disk type, etc.); otherwise, BIOS will
keep the previous settings.

After selecting 

Load Default Settings

 the following dialog box appears:

Do you want to load default settings?

Yes

No

Selecting 

Yes

 enables BIOS to detect the new default values. Selecting 

No

 returns you to the main

menu without loading the default settings.

Summary of Contents for V70LA




































Reviews:

No comments

Brands by name

Popular brands

Load more brands