System Information
16 - English
A26361-K522-Z120-2-7419
i
As an advanced user you can call the Advanced level by pressing
in the main menu.
Additional parameters appear. These parameters are marked with asterisk (*) in this
manual.
The command line at the bottom of the menus tells you how to use
BIOS Setup
.
To select an option: move the highlight bar by pressing
or
. Then press Enter.
Press
to move to the next page or
to return to the previous page.
To change a parameter setting: press the
or
key until the desired setting is found.
Press
to return to the main menu.
To exit
BIOS Setup
press
in the main menu.
System Information
System Information
Page 1/2
Processor.......................... IDT-C6
Processor Speed.................... 200 MHz
Internal Cache Size................ 64 KB, Enabled
External Cache Size................ 512 KB, Enabled
Floppy Drive A..................... 1.44 MB, 3.5-inch
Floppy Drive B..................... None
+IDE Primary
Channel Master ......... Hard Disk, 3400 MB
+IDE Primary
Channel Slave .......... None
+IDE Secondary Channel Master....... None
IDE Secondary Channel Slave........ IDE CD-ROM
Total Memory....................... 32 MB
1st Bank......................... SDRAM, 32 MB
+2nd Bank......................... None
PgDn/PgUp = Move Screen, Esc = Back to Main Menu
Example for
System
Information menu
i
All parameters marked with a plus (+) sign will appear only if there is a device connected
or installed.
The
System Information
menu displays the standard system functions of the device.
