Advanced Options
28 - English
A26361-K522-Z120-2-7419
PnP / PCI Options
calls the submenu in which you can make the settings for Plug&Play and the PCI bus.
*PnP / PCI Options
Page 1/1
*PCI IRQ Setting ...................... [Auto]
INTA INTB INTC INTD
*PCI Slot 1 ........................ [--] [--] [--] [10]
*PCI Slot 2 ........................ [--] [--] [10] [--]
*PCI IRQ Sharing ...................... [Yes]
*VGA Palette Snoop .................... [Disabled]
*Plug and Play OS ..................... [Yes]
*Reset Resource Assignments ........... [No]
↑↓
= Move Highlight Bar
F1 = Help
Esc = Exit
→
←
= Change Setting,
Example for the
PnP / PCI Options
submenu
PCI IRQ Setting
defines the setting of the PCI interrupts.
Select
Auto
, if you use PCI boards supporting Plug&Play. Otherwise select
Manual
.
PCI Slot 1 / 2
If
PCI IRQ Setting
is set to
Manual
, you can set the PCI interrupts in this field.
Multifunctional PCI boards or boards with an integrated PCI-to-PCI bridge can use several PCI
interrupts (INTA#, INTB#, INTC#, INTD#). Monofunctional PCI boards (default) only use one PCI
interrupt (INTA#) per PCI slot.
The PCI interrupts INTA#, INTB#, INTC# and INTD# are available for every PCI slot.
PCI IRQ Sharing
The same interrupt can be assigned simultaneously to several PCI boards.
Select
Yes
, if you want to assign one interrupt to several boards. Otherwise select
No
.
VGA Palette Snoop
Select
Enabled
to activate the Palette Snoop function in VGA boards installed in the device.
