manualshive.com logo in svg

Acer V70LA, Technical Manual

Share
Download
Acer V70LA Technical Manual Download Page 26

Advanced Options

26 - English

A26361-K522-Z120-2-7419

Power-on Password

With the system password you can prevent booting of the operating system. The system can be
accessed only by those who know the system password.

You can set the system password in the 

Power-on Password

 field. Follow the same procedure as in

setting the Setup password.

Disk Drive Control

Disk Drive Control

 is used to enable and disable drive write-protection.

The table shows the possible settings and their meaning:

Floppy disk drive

Settings

Meaning

Normal

Floppy disks may be read, written to or deleted.

Write Protect All Sectors

Diskettes can only be read.

Write Protect Boot Sector

The boot sector of floppy disks is read-only. The
remaining data on the floppy disk may be read,
written or deleted.

Hard disk drive

Settings

Meaning

Normal

Hard disks may be read, written to or deleted.

Write Protect All Sectors

Hard disks are read-only.

Write Protect Boot Sector

The boot sector of the hard disk is read-only.
The remaining data on the hard disk may be
read, written to or deleted.

Advanced Options

This menu and the associated submenus are shown in Advanced level only.

!

Change the default settings only for special applications. Incorrect settings can cause
malfunctions.

Summary of Contents for V70LA




































Reviews:

No comments

Brands by name

Popular brands

Load more brands