Disk Drives
A26361-K522-Z120-2-7419
English - 19
IDE Drives
Configures the IDE drives.
IDE Primary/Secondary
Channel Master/Slave
Page 1/1
Type ........................... [ Auto ]
Cylinder ..................... [ XXXX ]
Head ......................... [ XXXX ]
Sector ....................... [ XXXX ]
Size ......................... [ XXXX ] MB
Hard Disk Size > 504MB ......... [ Auto ]
*Hard Disk Block Mode ........... [ Auto ]
*Advanced PIO Mode .............. [ Auto ]
*Hard Disk 32 Bit Access ........ [Enabled]
*DMA Transfer Mode .............. [ Auto ]
↑↓
= Move Highlight Bar
F1 = Help
Esc = Exit
→
←
= Change Setting,
Example for
IDE Primary/Secondary
menu
Type
This field is used to specify the type of hard disk drive.
Auto
configures the hard disk automatically.
You do not need to select the parameters yourself. If you know your hard disk type, you can enter
the setting manually with the
Cylinder, Head, Sector
and
Size
parameters.
Cylinders
Number of cylinders
Head
Number of heads
Sectors
Number of sectors
Size
Size of the hard disk in Mbyte
Hard Disk Size > 504 MB
Auto
automatically detects the installed hard disk and supports the function if possible.
Hard Disk Block Mode
This function enhances disk performance depending on the hard disk in use.
Auto
automatically
detects the installed hard disk and supports the function if possible. If supported data can be
transferred in blocks.
Disabled
does not support this function.
Advanced PIO Mode (Programmed Input Output Mode)
This function defines the transfer rate of the IDE hard disk drive.
Auto
automatically detects if this
function is supported.
Hard Disk 32-bit Access
This function allows the 32-bit hard disk access.
DMA Transfer Mode
This field specifies the transfer mode for the IDE hard disk drive.
Auto
automatically detects if this
function is supported.
