Power Management
22 - English
A26361-K522-Z120-2-7419
Power Management
Programs for power management can change the settings for the energy saving functions.
Power Management
Page 1/1
Power Management Mode .............. [Enabled ]
IDE Hard Disk Standby Timer ..... [Off] Minute(s)
System Sleep Timer .............. [30] Minute(s)
Sleep Mode .................... [Suspend ]
Power Switch < 4 Sec. ............... [Power Off ]
System Wake-Up Event
Modem Ring Indicator .............. [Disabled ]
Magic Packet .. [Enabled ]
↑↓
= Move Highlight Bar
F1 = Help
Esc = Exit
→
←
= Change Setting,
Example for menu
Power Management
Power Management Mode
This field defines the extent of the energy saving functions. When
Enabled
is set, the functions set in
the fields
IDE Hard Disk Standby Timer
and
System Sleep Timer
are effective. When
Disabled
is set, the
energy saving functions are disabled.
Power Switch < 4 sec
Power Off
switches the system off, when the On/Off switch is pressed.
Suspend
switches the system in Suspend mode, when the On/Off switch is pressed.
System Wake-Up Event
specifies the event which wakes up the system.
Modem Ring Indicator
specifies whether the system can be switched on by an incoming message (e.g. via modem, fax or
telephone). The signal can be supplied externally via serial port 1 or internally via the modem on
connector.
When
Enabled
is set the system can be switched on by means of an incoming message.
When
Disabled
is set the system cannot be switched on by means of an incoming message.
Magic Packet
determines whether the system can be switched on by means of an LAN controller (onboard or
additional board).
When
Enabled
is set the system can be switched on by means of an LAN controller.
When
Disabled
is set the system cannot be switched on by means of an LAN controller.
